30'' SuitPrint Opaque Transfer for Eco-sol / Solvent x 22y

Code de produit :
PRE-SOFTPRINT30

Qté	Prix
1 x	390,23$ CAD
3 x	364,21$ CAD
6 x	341,45$ CAD

Qté : 


Product description;
White matt polyurethane media for use on eco and true solvent printers for heat transfer applications.
Thickness : 100 microns (USA : 4 mil).
Carrier : Transparent polyester.
Norm : certified Oeko-Tex, standard 100, class I.
Suitable for;
Cotton, polyester, acrylic and similar fibres.

Application advises;

1) printing and cutting
- Prepare the image on positive following the instruction of the printer producer :
-Take care of the printing (45°C – USA : 110°F) and drying temperatures (50°C – USA : 120°F).
-Use the adequate printing profile (for instance, with Roland, select Colorip or Versawork, and then
profile TTRH, textile).
- Remove the flex from the printer and wait for the complete drying of inks at room temperature, at least 4 hours.

2) heat pressing
- Weed the excess material.
- Using an application tape is not compulsory to transfer the image. It is possible to transfer the image by hand
or with a standard application tape.
- Position and heat press the image on the garment protected by a silicone paper at 160°C (USA : 320°F ) –
20 seconds – medium pressure.
- If you use it, peel the application tape off when cold.

Maintenance;

Always respect the instructions mentioned on garments. After heat pressing, wait 24 hours before the first wash.
Washing : 40°C (USA : 100°F) max. inside out - without ble ach or any aggressive washing products.
Dried cleaning : no
Ironing : backside
Storage of the roll : vertically, one year in a dry room, 15-25°C (USA : 60-80°F), protected from sunlight.